BPW-8110 - Boser BPW-8110 120W DC-DC Open Frame Power Supply

BPW-8110 - Boser BPW-8110 120W DC-DC Open Frame Power Supply Simple Type:...

Boser BPW-8110 120W DC-DC Open Frame Power Supply Simple Type: Power Supply

Boser BPW-8110 80W DC/DC open frame power supply.

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Altitude: > 10,000 feet
DC Input: Terminal blocks
DC Output: Molex 5273-12A
Dimensions: 15.24 x 8.38 x 3.8 cm with +/-0.8mm and +/-0.4mm tolerance between mounting holes
Efficiency: > 70% at DC24V and rated load
EMI: FCC class B / EN55022 B
EMS: Level 3 of IEC-802, 803, 804
Input Current: 7A at 24VDC max.
Input Voltage: 18~36VDC
Inrush Current: < 10A at 24VDC input from a cold start 25°C excluding EMI suppression capactiors
Line Regulation: < +/-1% for each output at rated load and +/-10% of input voltage variables
Load Range: With all other outputs within their accuracy ranges and all output at 60% rated load, the +5V output is between 4.95~5.05V. Max. load can not exceed 80W convenction cooling and 100W forced air cooling
Load Regulation: < +/-1% for +5V, and < +/-5% for -12V, +12V, -5V while changing measured output load from +/-40% to 60% rated load and keeping other outputs at 60% rated load
Protection: Built-in over voltage protection circuit. Trip point of crowbar circuit is between 5.7~7V. Hiccup mode against short circuit or over load conditions auto recovery when fault conditions are removed
Ripple And Noise: Peak to peak ripple and noise for +5V is < 50mV, and < 100mV for the other outputs at rated load, nominal line
Safety: UL 1950 / CSA 22.2 No.234 / VDE EN60950
Temperature: 0~+50°C, can start up -20°C (operating); -40~+85°C (storage)