BOSER Industrial Partner

MPE-F40 - Boser MPE-F40 40W 85~264VAC AC-DC Open Frame Power Supply Simple...

larger image

Request Quote
For Price
Part Number:
MPE-F40
Model Number:
MPE-F40
Make:
BOSER
Lead Time:
Available
Qty In Stock:
Available

Boser MPE-F40 40W 85~264VAC AC-DC Open Frame Power Supply Simple Type: Power Supply

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • None Available

Specifications

    General
  • Efficiency: The efficiency is 78%(MPE-F40-05)/84%(MPE-F40-12)/86%(MPE-F40-24)/88%(MPE-F40-48)typical while measuring is at nominal line and rated load
  • Hold Up Time: Hold up time is 8mS typical at 115VAC input, full load
  • Humidity: 5~95% non-condensing
  • I/P Connector: Molex housing 09-50-3031 and Molex 2878 series cirimp terminal
  • Input Current: The maximum input current is 0.65A at 115VAC or 0.32A at 230VAC
  • Input Frequency: 47~63Hz
  • Inrush Current: The cold inrush current will limit less than 50A at 264VAC input voltage
  • Line Regulation: The line regulation is less than +/-0.5% while measuring at rated load and from 100VAC to 240VAC input voltage changing
  • Load Range: At factory, the output is checked between 4.9~5.1V(MPE-F40-05)/11.76~12.24V(MPE-F40-12)/23.5~24.5V(MPE-F40-24)/47.04~48.96V(MPE-F40-48) at 60% rated load
  • Load Regulation: The load regulation for output is less than +/-1%, measuring is done by changing the output load +/-40% from 60% rated load
  • nput Voltage: The range of input voltage is from 90~264VAC
  • O/P Connector: Molex housing 09-50-3031 and Molex 2878 series cirimp terminal
  • Protection: The power supply will go into hiccup mode against short circuit or over load conditions, and will do auto-recovery while faulty conditions are removed
  • Ripple And Noise: The peak to peak ripple and noise is less than 50mV(MPE-F40-05)/120mV(MPE-F40-12)/240mV(MPE-F40-24)/480mV(MPE-F40-48). Measuring is done by 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor at rated load, nominal line
  • Safety: UL 1950 / TUV EN60950 / CE mark
  • Temperature: 0~+50°C (operating); -40~+85°C (storage)

 

Applications

  • None Available

Aliases

  • None Available